Car Alarm

Car Alarm

Features
1. The car alarm uses F10 main panel whose frequency band can be GSM900 or DCS1800, weight is 45.5g and dimension is Length 83× Width 46.5× Thickness 20.5mm.
2. It can be driven by car cigarette lighting or built-in rechargeable Li-battery. Furthermore, the standard voltage is 3.7V, charging voltage 4.2V, rating capacity 600mAh and working time 72h.
3. By using the GPRS, the product is able to transmit the car status, alarm information to Security Company, monitoring center and other department involved. And its center server can timely check the car location. And the GSM SIM card is inserted to send information via SMS or phone call.
4. FM radio is also supported to play music or listen by earphone.
5. Due to the infrasonic wave technology, the car alarm is highly sensitive to the situations of the car and chooses different arming ways in different locations. Featuring low false alarm and higher accuracy, it supports manual delay arm, real time disarm, and GSM remote disarm and arm.
6. Also, the alarm sensor is available in vibration, sound pressure types. Any beat or hit to the car will trigger the vibration sensor which will send message to registration mobile in 10s. Within this 10s, user can cancel this alarm and disarm. When the car body and windows was broken suddenly, the sound pressure sensor of this car alarm will be activated. Then this device will call registration mobiles to tell the owner to monitor the situations of his car. And both of these 2 devices will not trigger the same alarming within 2mins after once.
7. To remind the user to check the error message, the yellow LED will blink three times, buzzer beep three times, and LCD blinks three times.
8. If M1 and M2 are not registered (empty number), car is in the area without network signal, U/SIM card is loosing or can't identify or M1, M2 are not registered, while the device is not in mandatory state, this car alarm fails to alarm.
9. Supporting USD2.0, this product can be connected with the car charger by the USB cable, to achieve charging, or with PC to transmit the data and charge. Moreover, it supports 12V car charging and 5V charger. In additional, the charger supports power for mobile phone with mini port, MP3, MP4 and other mobile devices.

FIRS Technologies (Shenzhen) is an experienced car alarm manufacturer based in China. Our products include driving fatigue detection camera, facial recognition access control system, face recognition time attendance machine, and much more.

Feedback Form
Other Products
  • Intelligent Vehicle DVRThe intelligent vehicle DVR is available with D1, HD1 or CIF resolution and 4CH AV monitoring input and 2CH alarm output.
    It comes with a G-sensor, 1TB hard disk and one SD card.
    Its hardware interface can be optionally 2× RS485, 1×RS232, etc.
    This product supports USB2.0 high speed data backup and Ethernet interface.
    It also has motion detection and watermark functions.
  • Intelligent Car Digital Video RecorderThe intelligent car digital video recorder features 8Vto 36V DC power supply, metallic aluminum cover, embedded design and low power consumption.
    And the AC power cut will continue for 8 seconds to make the data safe.
    USB2.0 high speed data backup and Ethernet interface are supported.
    Apart from the 8 alarm input and 2 alarm output, this product also comes with 4D1 resolution, 4CH AV monitoring input, 2CH video output and 2CH audio output.